Filter
Top Products
Connect the Computer to the Gateway
10
Install the 2Wire Gateway USB Driver - Macintosh
Note: The 2Wire gateway supports USB for Macintosh OS 8.6, 9.2, 10.1.4, 10.1.5, 10.2.0,
10.2.1 to 10.2.6, 10.3.3 to 10.3.9, 10.4.0, and 10.4.1.
Before making the USB connection to the gateway, you must install the 2Wire gateway USB driver on the
computer. The following instructions are for USB installation on Macintosh computers running OS 10.2.
1. With the computer powered on and the 2Wire Setup Wizard CD in the CD-ROM drive, double-click the
2Wire CD icon on the desktop.
2. Double-click 2Wire USB to begin the driver installation.
3. If the user has set up an administrator name and password, the Authenticate screen opens. Enter the
administrator name and password and click
OK.
4. Follow the on-screen instructions. When the driver installation is complete, you will be prompted to
restart the computer.
5. After the computer restarts, connect the provided blue USB cable from the USB-PC port on the 2Wire
gateway to the computer's
USB port.