Filter
Top Products
D-6 APPENDIX D: ADMINISTERING VLANS
If you did not choose the IP protocol suite for this VLAN, you have
completed the steps for defining the VLAN.
7 If you have selected the IP protocol suite and want to use the Layer 3
address information, enter
defined for layer 3 addressing. Enter undefined
if you do not want layer 3 addressing.
If you selected the IP protocol suite, follow these steps:
8 Enter
defined to use layer 3 subnet addressing and continue with steps 2
and 3, OR enter
undefined to not use layer 3 addressing.
9 Enter the IP subnet address.
10 Enter the subnetwork mask.
Example:
Select menu option (bridge/vlan): define
Select bridge(s) by slot (2-3,5,10-12) [2-3,5,10-12]:9
Enter Protocol Suite (IP,IPX,Apple,XNS,DECnet,SNA,
Vines,X.25,NetBIOS,default):
IP
Enter Integer VLAN Identifier: 7
Enter VLAN Name: SD Marketing
Slot 10: Ports 1-2 FDDI
Slot 11: Ports 3-10=Fast Ethernet
Slot 12: Ports 11-16=Fast Ethernet
Enter port(s) (1-16|all):
1-5,11
Layer 3 Address (undefined, defined): defined
Enter IP Subnet Address: 158.111.122.0
Enter subnet mask [255.255.0.0] 255.255.255.0
The three modules in slot 10, 11, and 12 form a single bridge, so you are
prompted for ports on all three modules.