Filter
Top Products
6-86
CHAPTER 6: COMMAND LINE INTERFACE
Default
Disabled
Command Mode
Global Configuration
Example
filter ethernet-type enable
This command checks the Ethernet type on all incoming and outgoing Ethernet
packets against the protocol filtering table. Use the no form to disable this
feature.
Syntax
[no] filter ethernet-type enable
Default
Disabled
Command Mode
Global Configuration
Command Usage
This command is used in conjunction with the filter ethernet-type
protocol command to determine which Ethernet protocol types are to be
filtered.
Example
Related Commands
filter ethernet-type protocol (6-87)
Outdoor 11a Building to Building (config)#filter uplink add
00-12-34-56-78-9a
Outdoor 11a Building to Building (config)#
Outdoor 11a Building to Building (config)#filter ethernet-type enable
Outdoor 11a Building to Building (config)#