Filter
Top Products
6-139
Using the Command Line Interface
show rogue-ap
This command displays the current rogue AP database.
Command Mode
Exec
Example
Wireless Security Commands
The commands described in this section configure parameters for wireless security
on the 802.11a and 802.11g interfaces.
Table 27 Wireless Security Commands
Outdoor 11a Building to Building #show rogue-ap
802.11a Channel : Rogue AP Status
AP Address(BSSID) SSID Channel(MHz) RSSI Type Privacy RSN
======================================================================
802.11g Channel : Rogue AP Status
AP Address(BSSID) SSID Channel(MHz) RSSI Type Privacy RSN
======================================================================
00-04-e2-2a-37-23 WLAN1AP 11(2462 MHz) 17 ESS 0 0
00-04-e2-2a-37-3d ANY 7(2442 MHz) 42 ESS 0 0
00-04-e2-2a-37-49 WLAN1AP 9(2452 MHz) 42 ESS 0 0
00-90-d1-08-9d-a7 WLAN1AP 1(2412 MHz) 12 ESS 0 0
00-30-f1-fb-31-f4 WLAN 6(2437 MHz) 16 ESS 0 0
Outdoor 11a Building to Building #
Command Function Mode Page
auth Defines the 802.11 authentication type allowed by
the access point
IC-W-VAP 6-143
encryption Defines whether or not WEP encryption is used to
provide privacy for wireless communications
IC-W-VAP 6-142
key Sets the keys used for WEP encryption IC-W 6-143
transmit-key Sets the index of the key to be used for encrypting
data frames sent between the access point and
wireless clients
IC-W-VAP 6-144
cipher-suite Selects an encryption method for the global key used
for multicast and broadcast traffic
IC-W-VAP 6-145
mic_mode Specifies how to calculate the Message Integrity
Check (MIC)
IC-W 6-146
wpa-pre-shared- key Defines a WPA preshared-key value IC-W-VAP 6-147