Filter
Top Products
DUA1640-5AAA02
7-14
C
HAPTER
7: M
ANAGEMENT
U
SING
THE
W
EB
I
NTERFACE
Console Port
Configuration
This page configures the console port.
The PS Hub’s console port is already correctly configured by default,
for direct connection to a management station. Only alter these default
settings if you are connecting a modem to the console port.
CAUTION: Do not change any of these settings unless you fully
understand what you are doing. Incorrect settings may lock you out
from the hub’s console port when you select Apply, and you may have
to contact your supplier for information on recovering management
communication if you cannot access the unit over the network.
If you want to change the settings but are unsure of the correct
settings to use, refer to the user documentation that accompanies
your terminal or modem.
The fields are:
Console connection
Terminal
/ Modem
Specifies what you are connecting directly to the console port. If you
are connecting to a modem, select Modem, otherwise leave as Terminal
(management station).
Port Speed
1200 / 2400 / 4800 / 9600 / 19200 / 38400 / AutoConfig
Specifies the baud rate of your management station or modem. The
stack hub can automatically configure its baud rate to work with your
management station or modem. Leave this field as
Autoconfig
if you
require auto-configuration.
Flow Control
None
/ Xon/Xoff / Hardware RTS/CTS
Specifies the flow control option that corresponds to your management
station or modem.