Filter
Top Products
Scanner Options Scamax 2600 / 5000 DpuScan
5.5.2 Setting Flags And Level
Illustration 15 – Setting Flags and Level
Set momentary Flag
Check this box to set the momentary flag in the header at Byte 155. The
Patchcode Controlled Index does not verify this flag, but the scan
application can use it to do something exactly for this one sheet, such as
call a function or start a new chapter.
The momentary flag will be reset automatically for the next sheet.
Set / Reset latched
Flag
This sets the permanent flag in the header at Byte 157. Once the latched
flag is set, it remains set until it is reset by another rule or at the beginning
of a new scan job.
Just as with the momentary flag, the Patchcode Controlled Index does not
evaluate the permanent flag, but the scan application can use it to, for
example, mark the addendum pages of a tax form.
Because the flag setting is not evaluated, it can be done immediately after
verifying a rule. That means that the latched flag can be set by a rule and
can be reset later by another rule on the same sheet.
Page 39 of 42