Abocom DVG-2101SP Network Router User Manual


 
DVG-2101SP
VOIP
Specification:
Key Components / Performance
CPU MPS
DSP LSI ZSP400/110MHz
Port Functions
LAN
1 x 10/100 BaseT ports
Compliant to following standards:
1. IEEE 802.3 (10BASE-T)
2. IEEE 802.3u (100BASE-TX)
3. IEEE 802.3x (Full-Duplex)
4. Support Full-Duplex operations
Phone Ports
2 x Phone port
1. Type of Circuit : Analog Circuit (FXS)
2. Connector Type : RJ11 connector
3. PSTN (Backup)
WAN:
z One 10/100Mbps auto-MDI/MDIX Ethernet port
z WAN type: Static IP, PPPoE, DHCP Client, BigPond
z NAT Traversal: Outbound Proxy, STUN, UPnP
z NTP
z DDNS
z RJ-45 Connector
z Bridge mode
Call features:
Call Hold, Call Waiting, Cancel Call Waiting, Caller ID with Name/Number (Multinational),
Caller ID Blocking. Call Waiting Caller ID with Name/Number.
Call Forward - Unconditional, Busy, No Answer, Do Not Disturb.
Call Transfer - Unattended, Attended, Call Blocking with Toll Restriction, Delayed Disconnect
Distinctive Ringing- Calling and Called Number, Off-Hook Warning Tone, Speed Dialing, Repeat Dialing, Three Way
Calling (Media Server required)