Filter
Top Products
Installation for Windows NT 4.0
This section describes the installation for
Windows NT under the condition that Windows
NT is already installed in your computer. If your
computer is not yet networking installed, refer to
the Windows documentation for details. Also
remember to have your original Windows NT
CD-ROM handy before you begin the
installation. For Windows NT may ask for it
during the installation.
1. Before you turn on your computer, make
sure the PCMCIA Fast Ethernet PC Card
has been properly inserted into the free
PCMCIA slot of your computer.
2. Start Windows NT.
3. Click StartSettingsControl Panel.
Double-click on the Network icon.
4. When the Network window appears, click
on the Adapters tab. Click on the Add
button, followed by Have Disk. Put the
driver disk into drive A.
- 9 -