Abocom SW800RE Switch User Manual


 
SW800RE
8-Port Fast Ethernet
N-Way Switch
The Fast Ethernet 10/100Mbps N-Way Switch provides
you a flexible, reliable, and affordable solution of the
Ethernet network. It comes with eight independent 10BASE-
T/100BASE-TX ports. Each port is able to operate in either
half or full-duplex modes.
The Fast Ethernet 10/100Mbps N-Way Switch also
processes a N-Way auto-negotiation function, which
automatically adjusts the device for optimum operation;
“Store-and-Forward” architecture filters to eliminate error
packets and improve efficiency, and MDI/MDIX auto
crossover technology provides for detecting a plugged straight
through or crossover Ethernet cable automatically. Plus,
Built-in 2M bits DRAM is smaller than the SRAM in
dimension and features very low power consumption.
Key Features & Specification
* Compliant with IEEE 802.3 10Base-T and IEEE
802.3u 100Base-TX standards
* Supports store-and-forward and cut-through operation
* 10/100Mbps port auto-detect on Full or Half Duplex
Mode
* IEEE 802.3x or Back Pressure (HDX) Flow Control
* Each Ethernet port supports MDI/MDIX auto
crossover capacity
* 8 (Eight) 10/100Mbps Auto-Detection ports
* Provides non-blocking and Head-of-line blocking
prevention
* Embedded 8K entries of look-up table and 128 entries
of CAM
* 2M bits DRAM as package storage buffer
* Broadcast storm control
* Power Feeding (Please do not use any other adapters
besides the one provided): +5VDC/1.5A
* Dimension (WxDxH): 138.5mm x 76mm x 21.5mm
* 8 x RJ45 STP/UTP network ports on rear panel
* Emission Certification: FCC/CE / C-Tick
* Operating Environment: Temperature: 0 ~ 40¢XC;
Humidity: 5 ~ 90 % RH