Abocom UCM56CR Network Card User Manual


 
UCM56CR
USB V.90 56K Fax/Modem
INTRODUCTION
The USB V.90 56K Fax/Modem is equipped
with one USB port and two standard RJ-11
telephone ports. It provides outside-the-box
plug-and-play local area network connections
for USB-enabled PCs, notebooks and laptops.
Users are able to enjoy the advantage of true
plug-and-play connections through a single
interface. The Fax/Modem operates with PSTN
telephone lines world-wide and on-line
connection is provided at ISDN-like speed,
almost twice than the standard V.34 modems.
Just plug it into any standard wall jacks and you’re networked!
Plus, installation is quite simple and no external power is required!
Internet access is never such easier and faster.
SPECIFICATIONS
Standard
Comply with USB specification 1.1.
Operating Protocol
Modem Compatibility
V.90, K56flex, V.34, V.32bis, V.32,
V.22bis, V.23, V.22/Bell 212A,
V.21/Bell 103
Error Correction Protocol
V.42 and MNP Class 2 to 4
Data Compression Protocol
V.42bis and MNP Class 5
Fax Compatibility
EIA 578 Class 1 fax commands
T.31 Class 1.0 commands
ITU-T V.17, ITU-T V.29, ITU-T V.27,
ITU-T V.21 Channel 2
Dialing Capability
DTMF tone and rotary pulse
Operating Modes
Asynchronous full duplex
Manual/Automatic answer
Transmit Level
Permissive -10 (+ / - 1) dBm
Line Interface
RJ-11, 2-wire dial-up
LED indication
TR/RX, Ready, Off Hook
Diagnostic
Power-up self-test
Local analog loopback test
Local digital loopback test
Software Control Interface
Hayes compatible AT command set
Call Progress Monitoring
Dial tone, busy tone and ring-back
detection