Filter
Top Products
Chapter 3 72
10. Remove the four screws that secure the PCMCIA slot, then remove the PCMCIA slot from the lower case.
Removing the Speaker Set
1. See “Removing the Battery” on page 52.
2. See “Removing the Middle Cover” on page 56.
3. See “Removing the Keyboard” on page 63.
4. See “Removing the Floppy Disk Drive Module” on page 67.
5. See “Removing the VGA Heatsink Plate” on page 68.
6. See “Removing the CPU Heatsink Plate” on page 68.
7. See “Removing the ODD Module(1)” on page 69.
8. See “Removing the HDD Bracket” on page 69.
9. See “Removing the Main Board” on page 70.
10. See “Removing the DC Board” on page 70.
11. Tear off the tape fastening the speaker set cable. Then remove the four screws that secure the speaker
set. Remove the speaker set from the lower case.