Filter
Top Products
61
BPL5M hot-swap cage components
The BPL5M hot-swap cage content box includes the following
components:
• One hot-swap cage (with backplane board attached)
• Five hard drive trays
• One mainboard connector cable
• Two hard drive fault LED connector cables
Installing the BPL5M hot-swap cage
1 Remove the housing panels. Refer to page 51 for more detailed
instructions.
2 Insert the BPL5M hot-swap cage into the housing and secure it
with the two screws provided. The hot-swap cage will occupy
three 5.25-inch drive bays.
3 Attach the power cable, the HDD fault LED cable, and the
mainboard connector cable to the backplane board and attach the
other end of the connector cable to the mainboard.
AA G610.book Page 61 Monday, October 22, 2001 9:46 AM