Filter
Top Products
3 Upgrading the system
40
Installing a hard disk into the BPL4 hard disk
carrier
Note: You need not remove the BPL4 hot-swappable cage from
the chassis to install a hard disk into the BPL4 hard disk carrier.
1 Press your finger to the SCSI drive release lever (1), then pull out
the hard disk carrier from the cage (2).
2 Remove the four screws to open the hard disk carrier. Keep the
screws for later use.
AA G700 - EN.book Page 40 Friday, June 7, 2002 9:27 AM