Filter
Top Products
3 Upgrading the system
52
Installing an expansion card
This section explains how to install an expansion card. The onboard
expansion slots supports PCI (Peripheral Component Interconnect)
cards.
To install an expansion card
1 Observe the ESD precautions and pre-installation procedures
described on page 31.
2 Locate an empty expansion slot on the mainboard.
3 Press the slot release latch outward (1).
4 Open the side cover of the slot (2).
5 Pull out the card bracket (3).
6 Remove the expansion card from its protective packaging.
7 Align the card in the empty bracket. Make sure that the card is
properly seated.
8 Insert the bracket with the card into the selected slot (4).
AA G700 - EN.book Page 52 Friday, June 7, 2002 9:27 AM