Filter
Top Products
79
View Event
Logs
Opens the system event log file for viewing
Event Control Interface
BIOS POST
Event Logging
BIOS checks the bad processors and
memory modules during the POST
process. When this parameter is enabled,
it will make a log of this operation.
Enabled
Disabled
ECC Event
Logging
ECC (error correcting code) tests the
accuracy of data as it passes in and out of
memory. When this parameter is enabled,
single-bit and multi-bit memory errors will
be recorded in the event log.
Enabled
Disabled
PCI Device
Event Logging
PCI (Peripheral Component Interconnect) is
a 32-bit bus that supports a 64-bit
extension for new processors, such as
Pentium processors. It can run at clock
speeds of 33 or 66 MHz. When this
parameter is enabled, any PCI device error
will be recorded in the event log.
Enabled
Disabled
AC Power
Lost/Recovery
When this parameter is enabled, any
instance of AC power lost will be
monitored and logged in the event log.
Disabled
Enabled
Reset
Reduction
Memory
When this parameter is enabled, only the
the system’s healthy memory size is
displayed during the POST process.
No
Yes
Parameter Description Option
AA G700 - EN.book Page 79 Friday, June 7, 2002 9:27 AM