Filter
Top Products
55
Installing a hot-swappable HDD fan
The Altos G700 series server accommodates two hot-swappable HDD
fans.
Note: The illustrations used in this section shows the Altos G701
server chassis.
To remove a hot-swappable HDD fan
Caution! To reduce the risk of personal injury, avoid contact with
the fan when the blades are still moving.
1 Place the system unit on a flat, stable surface.
2 Detach the chassis panels and remove the air baffle.
3 Grasp the release bracket on both sides of the fan (1) then pull it
out.
AA G701 - EN.book Page 55 Tuesday, February 25, 2003 5:19 PM