Filter
Top Products
8
&D1 Modem returns to Command Mode after DTR
toggle
&D2 Modem hangs up, returns to the Command
Mode after DTR toggle
&D3 Resets modem after DTR toggle
&F_ &F0 Recall factory default configuration
&F3 Reset for extended responses
&G_ &G0 Guard tone disabled
&G1 550 Hz guard tone
&G2 1800 Hz guard tone
&K_ &K0 Disable DTE flow control
&K3 RTS/CTS flow control
&K4 XON/XOFF flow control
&K5 Transparent XON/XOFF flow control
&L_ &L0 Dialup telephone line
&L1 Leased Line
&M_ &M0 Asynchronous operation
&N_ &N0 Special echo canceller training sequence not
required
&N1 Special echo canceller training sequence
required
&P_ &P0 United States setting for off-hook (make) -
to-on-hook (break) ratio
&P1 UK and Hong Kong off-hook (make)-to-on-
hook (break) ratio
&Q_ &Q0 Asynchronous operation
&Q5 Modem connects using MNP or V.42
&Q6 Modem connects in Normal mode
&S_ &S0 Force DSR Signal High (ON)
&S1 DSR is off in command mode, on in on-line
mode
&T_ &T0 Ends test in progress
&T1 Perform Local Analog Loopback Test
&T3 Perform Local Digital Loopback Test
&T4 Grant Remote Digital Loopback Test
request by remote modem
&T5 Deny Remote Digital Loopback Test request
by remote modem
&T6 Perform a Remote Digital Loopback Test
&T7 Perform a Remote Digital Loopback Test and
Self-Test