Filter
Top Products
Course Goals
Enable engineers and partners to fully implement an ACER Altos NAS 700
Appliance.
Prerequisites
Learners should meet the following prerequisites before installing a NAS 700
appliance (or equivalent experience):
• Acer Server Product Training (or knowledge about the current Acer
Server product range and technology)
• Acer RAID Workshop (or work experience with Server RAID Adapter
and RAID technology)
• Fibre Channel technology basics
• Linux basic knowledge or experience (Installation and configuration)
Overview of the ACER Altos NAS 700 Appliance
The ACER Altos NAS 700 Appliance is based on the Altos G710 server which
comes with two 36Gb U320 SCSI hard drives. ACER recommends that you
configure a RAID1 in order to offer redundancy for the Operating System.
Final users can use up to 6 additional internal hard disks for their data when
using the second SCSI cage, without requiring external enclosure. So this
configuration can offer a RAID 5 volume up to 730 GB of internal storage.
ACER Altos NAS 700 Appliance prevents soft-errors by using it’s snapshot and
TimeMark features. It increases storage utilization and provides both file and
block level access. It also offers 2 different backup solutions 1. standard Tape
backup and 2. High performing Disk to Disk (D2D) backup for your NAS shares
and SANDisks.
Acer Altos® NAS 700 Solution Guide
2