Acer R300 Network Card User Manual


 
41
Removing or installing the hard disk
drive
To remove or install a hard disk drive:
1 Remove the system cover. See “Removing the system cover” on
page 35 for more information.
2 The system has two hard disk drives located below the CD-ROM
and floppy drive. Refer to the procedures described below to
remove a hard disk drive.
To remove the hard disk drive under the CD-ROM drive:
a Disconnect all cables connected to the CD-ROM and hard disk
(1, 2, 3, 4).
b Remove the screw that holds the CD-ROM and hard disk
assembly to the housing (5).
c Slide (6) then lift up the assembly from the system housing (7).
aa r300.book Page 41 Tuesday, March 4, 2003 9:39 AM