Filter
Top Products
43
3 Remove the four screws that hold the hard disk to the disk frame
(1) and pull out the hard disk drive (2). Keep the screws for later
use.
4 Install a new hard disk drive (1) and secure it with the four screws
removed earlier (2).
5 After installing the new hard disk drive, reinstall it back in its
proper location.
To install the CD-ROM and hard disk drive assembly:
a Slide the CD-ROM and hard disk drive assembly into the
housing (1, 2) then secure it with the screw removed earlier
(3).
aa r300.book Page 43 Tuesday, March 4, 2003 9:39 AM