Filter
Top Products
47
Removing and installing the CPU
The mainboard supports Intel
®
Pentium
®
4
processor running at 533
MHz to 3.06 GHz or Intel
®
Celeron processor running at 400 MHz to 2.2
GHz and future generations of Celeron CPUs.
Caution! Always observe the ESD precautions when installing or
removing a system component. Refer to the “Installation
precautions” on page 33.
Removing the CPU
Follow these steps to remove a CPU:
1 Remove the system cover. See page 35 for more detailed
instructions.
2 Remove the air baffle by lifting it up (1) then sliding it to the
direction shown below (2).
3 Locate the CPU socket on the mainboard.
Warning! The heatsink may feel hot after long period of
usage. It is recommended to allow a few minutes of
cooling period before attempting the upgrade.
aa r300.book Page 47 Tuesday, March 4, 2003 9:39 AM