Filter
Top Products
49
3 Align the the new CPU into its socket (1). Make sure that pin 1
(indicated by a notched corner) of the CPU connects to hole 1 of
the socket (2).
Press down the socket lever to lock the new CPU into the socket
(3).
Place the heatsink on top of the CPU (4). Secure the clips (5) then
tighten the screws to secure the assembly (6).
4 Align the air baffle to the housing (1) then gently push it into
place (2).
5 Replace the system cover.
aa r300.book Page 49 Tuesday, March 4, 2003 9:39 AM