Filter
Top Products
Chapter 2 42
HDD Power Down This setting controls how long a hard disk drive
must be left idle before it spins down.
Disabled
Standby
Suspend
HDD Down In Suspend Enables or disables the functionality of HDD
down in suspend.
Enabled
Disabled
Soft-off by PWR/BTTN When Enabled, turning the system off with the
on/off button places the system in a very low-
power-usage state, with only enough circuitry
receiving power to detect power button activity or
Resume by Ring activity.
Instant-off: Press down
button then power off
instantly
Delay 4 Sec.: Press power
button 4 sec. to power off.
Enter suspend if button is
pressed less than 4 sec.
WOL (PME#) From Soft-
Off
This category enables or disables wake-on-Lan
from soft-off
Enabled
Disabled
USB Resume from S1/S3 Enable or Disable USB device (USB K/B or
Mouse) wake up system from S1/S3.
Enabled
Disabled
Resume by Alarm You can set “Resume by Alarm” item to enabled
and key in Data/Time to power on system
Disabled: Disable this
function
Enabled: Enable alarm
function to Power On
system
If RTC Alarm Lead To
Power On is Enabled.
Date (of Month) Alarm:
Everyday, 1~31
Time (hh:mm:ss) Alarm:
(0.~23):(0~59):(0~59)
POWER ON Function Select the method to power on the system. Button Only
Keyboard 98
Hot Key
Mouse Left
Mouse Right
PWRON After PWR-Fail This field allows you to determine the power
status to on/off or former-sts after the system.
FORMER-Sts
On
Off
Parameter Description Options