Filter
Top Products
31
Note: If you are using a PS/2 keyboard, plug the keyboard cable
into the PS/2 keyboard port (purple port) located on the rear
panel of your computer.
Monitor
To connect a monitor, simply plug the monitor cable into the monitor
port (blue port) located on the rear panel of your computer.
Note: The CRT monitor port is automatically disabled when an
add-on VGA card is installed into the system. Connect the monitor
to the VGA port instead.
Note: Refer to the monitor manual for additonal instructions and
information.
ver3300-ug-EN.book Page 31 Monday, July 2, 2001 4:58 PM