Filter
Top Products
57 Chapter 2
(1) Create RAID Volume:
Select this option and press
e. The following screen appears:
Specify a RAID Volume name and then press the vor ekey to go to the next field.
Select the strip value for the RAID 0/1 array by scrolling through the available values by using the
wor y keys and pressing the ekey to select and advance to the next field.
The available values range from 4KB to 128 KB in power of 2 increments. The strip value should be
chosen based on the planned drive usage. Here are some suggested selections:
16 KB - Best for sequential transfers
64 KB - Good general purpose strip size
128 KB - Best performance for most desktops and workstations. The default value.