Filter
Top Products
15
Setup
The setup refers to the Setup Wizard and the Terminal Properties.
The Setup Wizard is used when the Acer WT 300 is installed for
the first time. The Terminal Properties is used after the Setup
Wizard is set.
Setup Wizard
The Setup Wizard lets you set terminal network configuration
and terminal display parameters. Any future changes can be
made using the Terminal Properties dialog box. You can launch
this dialog box anywhere in the program at any time by pressing
the [F2] key, see Terminal Properties on page 33.
There are several dialog boxes that display in succession during
the process. Each dialog box is self-explanatory. Some dialog
boxes are informational and require no user input. Other dialog
boxes will prompt you for network and display information.
Click on the “Next” or “Accept” buttons to display the next dialog
box in the sequence. Click on the Back command button to
return to the previous dialog box. Click on Cancel to quit and
display the Terminal Connections Manager. Following are the
dialog boxes of the Setup Wizard.
Wbt.book Page 15 Monday, August 2, 1999 4:07 PM