Filter
Top Products
46 Chapter 3
Removing the Front I/O and Card Reader Boards
1. See “Removing the Side Panel” on page 29.
2. See “Removing the Front Bezel” on page 30.
3. See “Remove the HDD-ODD bracket” on page 36.
4. Open the cable retention clips and disconnect the USB, 1394, and audio cables from their mainboard
connectors.
5. Remove the front I/O and card reader bracket.
(1). Remove the screw (B) that secures the bracket to the unit.
Screw (Quantity) Color Torque Part No.
#6-32 L6 NI (1) Silver 4.75 to 5.2 kgf-cm 86.00J44.C60
X3950 X5950