Filter
Top Products
30 Chapter 2
Power
The Power screen contains parameters used for device power management.
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter Description Option
ACPI Suspend Mode This field allows the user to set the ACPI Suspend
Mode.
Option:
S1(POS)/S3
(STR)
Power On by RTC Alarm This field allows the user to disable or enable auto
wake up at a fixed time everyday.
Option: Disabled
or Enabled
Power On by Onboard
LAN
This field allows the user to disable or enable wake up
when the system power is off and a LAN device is
activated.
Option: Disabled
or Enabled
Wake Up by USB KB/
Mouse
This field allows the user to disable or enable wake up
when the system is in standby and a USB device is
activated.
Option: Enabled
or Disabled
Restore On AC Power
Loss
Set the state the device returns to in the event of AC
power loss. Off causes the device to remain off in the
event of power loss and On restarts the device when
AC power resumes.
Option: On/Off/
Last State
PhoenixBIOS Setup Utility
Item Specific Help
Enter one of the ACPI
states.
F1
Esc
Help
Exit
Select Item
Select Menu
Change Values
Press Enter Press Enter
F9
F10
Setup Defaults
Save and Exit
[S3 (STR)]
[Disabled]
[Disabled]
[Enabled]
[Last State]
ACPI Suspend Mode:
Power On by RTC Alarm:
Power On by Onboard LAN:
Wake Up by USB KB/Mouse:
Restore On AC Power Loss:
ACPI Suspend Mode:
Power On by RTC Alarm:
Power On by Onboard LAN:
Wake Up by USB KB/Mouse:
Restore On AC Power Loss:
-/+
Main Boot
Exit
SecurityInfo Advanced
PowerPC Health