Filter
Top Products
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
PC 6408
8” Fanless Panel PC
4.5.2 PRECONFIGURED JUMPERS
WARNING:
Do not change the settings on the jumpers in described here. Doing so may disable or
damage the system
The following jumpers are preconfigured for the PC5153/ PC5173. Users should no
change these jumpers.
4.5.3 CF CARD SETUP
Jumper Label: JCF1
Jumper Type: 2-pin header
Jumper Settings:See Table 4-3
Jumper Location: See Figure 4-2
The CF Card Setup jumper sets the CF Type I card or CF Type II cards as either the
slave device or the master device. CF Card Setup jumper settings are shown in Table
4-3.
The CF Card Setup jumper location is shown in Figure 4-2.