Filter
Top Products
25
Chapter 2 Setting Up the Gateway
9. When the next window appears, plug one end of the Yello w (Ethernet) Cable
into the Yellow Port on the back of the Gateway, then click Next.
10. Another window appears. Plug the other end of the Yello w (Ethernet) Cable
into an Ethernet port on the back of the computer, then click Next.
☞
Note:An Ethernet port looks similar to a phone port, but is
slightly bigger.
11. When the next window appears, confirm the Power and one of the Ethernet
Lights on the Gateway glows steadily green.This may take up to 30 seconds.
Click Next.