Filter
Top Products
14
Actiontec MegaPlug Ethernet Adapter User Manual
15
Chapter 4 Troubleshooting
s Use the Adapter’s Configuration Utility to detect all other Adapters on the
network. Then, plug the Adapters into adjacent sockets. If the Ethernet lights
still don’t illuminate, contact technical support.
The Power and Link lights are on, but I can’t access the router/gateway from
the computer
s Try plugging the Adapters in different power outlets, preferably closer
together.
s Make sure all Adapters on the network are using the same security parameters.
Frequently Asked Questions
What’s the transfer speed over the Adapter’s network?
The Adapter’s network transfer speed is 85 Mbps (maximum) over a standard
home power line network.
What’s the estimated range of the Adapter’s network?
Approximately 300 meters (~985 ft.) in wall power lines (one household).
Will the Adapter work in any home?
The Adapter will work in any home with built-in copper wiring. It may not
operate in some older homes (pre-1950) with alternate wiring.
Will the Adapter’s network signal pass through circuit breakers?
Yes, the Adapter’s network signal will pass through circuit breakers. It will not,
however, pass through power transformers.
Does the Adapter work with a 100 – 240V AC input ?
Yes.
Does using the Adapter cause any interference with other home network-
ing devices?