Filter
Top Products
17
Setting Up Static
IP Address
To communicate with a MegaPlug Ethernet Adapter from a computer on the net-
work, the user may have to switch the IP address settings from DHCP-enabled to
static IP, so that the computer and the Adapter are on the same subnet.
To set up static IP on a computer, select the operating system and follow the
instructions.
☞
Note: The following procedures are based on the Adapter’s
factory default IP address. If the Adapter’s IP address has been
changed, enter the new IP address when instructed to enter an
IP address.
Windows 98 SE
1. From the desktop, click on the Start button in the lower left corner.
2. From the menu that appears, select Settings.
5