Filter
Top Products
4-12
ANA-5910/5930/5940 User’s Guide
12
Add additional clients (1 to 3) by following the above
procedures, or Select Restart Now to save and initialize
changes.
reconfiguring a LANE Client
To reconfigure a LANE client:
1
In the Program Manager’s Main group window, select the
Control Panel icon.
2
Select the Network icon.
3
Select the LANE adapter you want to reconfigure, for example,
Adaptec LANE Adapter (ELAN 0), and then select Configure.
4
Change any editable parameter as described in the installation
procedures earlier in this chapter.
5
Select Restart Now to save and initialize changes.
Removing a LANE Client
1
In the Program Manager’s Main group window, select the
Control Panel icon.
2
Select the Network icon.
3
Select the LANE adapter you want to remove, such as Adaptec
LANE Adapter (ELAN 0), from the Installed Adapter Cards
drop-down list, and then select Remove.
4
Select Yes.
5
In the Network Settings dialog box, select OK.
6
Select Restart Now to save and initialize changes.