Filter
Top Products
Megabit Modem 410F and 420F User Manual 5
2
WHAT YOU NEED TO START
This chapter identifies the preparations and prerequisites for installing the Megabit Modem
410F and 420F. Install the Megabit Modem 410F (ATU-C) at one end of the circuit and a
Megabit Modem 420F (ATU-R) at the other end. To install each modem, verify that:
• the contents of the package are accurate as described on this page
• your system meets requirements for connecting to and configuring the modem
(see “Requirements for your System” on page 6)
• your facility meets installation site requirements (see “Requirements for the Installation
Site” on page 6)
• you have made the choice for the power option for the modem (see “Power Cable Options”
on page 9)
VERIFY PACKAGE CONTENTS
As you unpack the Megabit Modem 410F or 420F, visually inspect the container for signs of
damage. If the equipment was damaged in transit, report the damage to the transportation
company and to the sales representative.
Check the contents of the package for the Megabit
Modem 410F or 420F and the following:
• one black cable
• onegreyphonecord
• four rubber, self-adhesive feet
• two screws
• power supply and optional power cord
(see “Power Cable Options” on page 9 for
options)
• grey cable and DB-9 console port adapter
LAN
ADSL
PWR
LINKTX
RX
SYNC
TXRX
MAR
M
E
G
A
B
I
T
M
O
D
E
M
4
2
0
F
COL