ADC ACE-142S/142V Network Card User Manual


 
ADCP-96-015 Issue A June 2001 Preface
Page vi
© 2004, ADC Telecommunications, Inc.
STANDARDS CERTIFICATION
Telcordia: This equipment complies with the applicable sections of GR-2898-CORE (Issue 2,
December 1999)
LIST OF ACRONYMS AND ABBREVIATIONS
The acronyms and abbreviations used in this manual are detailed in the following list:
AW G American Wire Gauge
C Centigrade
F Fahrenheit
FDT Fiber Distribution Terminal
FMS Fiberglass Mounting Sleeve
FTTP Fiber To The Premises
OSP Outside Plant
PMF Pad Mount Frame
Danger: Do not look into the ends of any optical fiber. Exposure to laser radiation may result.
Do not assume the laser power is turned-off or that the fiber is disconnected at the other end.
Danger: Use adequate lifting equipment when moving or installing Fiber Distribution Terminal
cabinets. Verify that the maximum lift weight rating of the equipment is sufficient to handle the
weight of the cabinet.
Danger: Do not stand under a Fiber Distribution Terminal cabinet as it is being hoisted into
position for mounting. A failure of the lifting equipment or apparatus could result in serious
personal injury.
Warning: Before digging, check with all local utilities for the presence of buried cables or
pipes. Contact with underground cables or pipes, especially electric power cables and gas
service lines, could interrupt local utility service and cause serious personal injury and
extensive property damage.