Filter
Top Products
Set Up the Campus-REX System
3-2 Campus-REX RS Interface Card User Manual
SET UP AN ASCII TERMINAL
You can configure the Campus system through an ASCII terminal connected
to the Desktop Unit or Campus-Star in which the Campus-REX is installed.
The terminal provides access to some configuration options not available
through the LCD menus.
Depending on your immediate configuration plans, you may not need to set
up an ASCII terminal now. However, you need to set up a terminal if one of
the following applies:
• you plan to use the Campus-REX as a router
• you need to change the HDSL transmission rate and do not want to use
the LCD menus
• you plan on setting additional configuration options at this time
• you want to view performance statistics on the HDSL and 10BASE-T
interfaces
If none of these reasons apply to you, skip this section and proceed to “Set the
HDSL Operating Mode” on page 3-7.
CAD1069i5.book Page 2 Thursday, May 30, 2002 7:32 AM