Filter
Top Products
Campus-REX RS Interface Card User Manual 4-1
4
CONFIGURING
AND
MONITORING
THROUGH THE
LCD
You can configure the Campus-REX RS Interface Card and view system
information using the LCD and menu buttons located on the front of the
Campus-RS Desktop Unit or a CMU installed in the Campus-Star chassis.
This chapter describes how to use the LCD to set the individual
configuration options.
You can also perform these functions through an ASCII terminal connected
to the Desktop Unit or a Campus-RS Line Unit installed in the Campus-Star.
To use an ASCII terminal to configure the system, see “Configuring with an
ASCII Terminal” on page 5-1. To view system and status information, see
“Monitoring with an ASCII Terminal” on page 6-1.
For Information About: See Page:
Navigating the LCD Menus 4-2
Restoring the System to Default Values 4-3
Configuring the Campus-REX as a Master or Slave Unit 4-4
Viewing and Configuring Alarms 4-5
Configuring Loopbacks 4-10
Viewing System Information 4-12
Viewing Status Information 4-13
CAD1069i5.book Page 1 Thursday, May 30, 2002 7:32 AM