Filter
Top Products
LTPS-UM-8013-03
ii August 30, 2002 D3LX CO and RMT Modules
Revision History of This Manual
To order copies of this document, use document catalog number LTPS-UM-8013-03.
Related Documentation
Soneplex Remote Terminal Enclosure Installation Manual ADCP-61-704
Soneplex Two-Position D3LX Remote Chassis Installation Instructions LTPS-AD-8029-xx
Soneplex Four-Position Remote Terminal Cabinet Installation Addendum for D3LX Systems LTPS-AD-8030-xx
Soneplex QLX/WQLXR and Four-Position Remote Terminal Cabinet Description Manual ADCP-61-151
Soneplex System Installation Manual LTPS-UM-8010-xx
Soneplex Loop Extender System Operation and Maintenance Manual ADCP-61-494
Soneplex TL1 Interface Specification for D3LX-Based Systems LTPS-UM-8027-xx
Soneplex D3LX Remote Craft Access Module (D3RCAM) User Manual LTPS-UM-8017-xx
Copyright
August 30, 2002
© 2002 ADC DSL Systems, Inc. All rights reserved.
Trademark Information
ADC and Soneplex are registered trademarks of ADC Telecommunications, Inc. No right, license, or interest to such trademarks is
granted hereunder, and you agree that no such right, license, or interest shall be asserted by you with respect to such trademark.
Other product names mentioned in this manual are used for identification purposes only and may be trademarks or registered
trademarks of their respective companies.
Disclaimer of Liability
Information contained in this document is company private to ADC DSL Systems, Inc., and shall not be modified, used, copied,
reproduced or disclosed in whole or in part without the written consent of ADC.
Contents herein are current as of the date of publication. ADC reserves the right to change the contents without prior notice. In no
event shall ADC be liable for any damages resulting from loss of data, loss of use, or loss of profits, and ADC further disclaims any
and all liability for indirect, incidental, special, consequential or other similar damages. This disclaimer of liability applies to all
products, publications and services during and after the warranty period.
Issue Release Date Revisions Made
1 January 11, 2002 Initial release
2 March 21, 2002 Updated BNC cable/cabling instructions
3 August 30, 2002 Updated BNC Tip and Ring illustration