ADC FlexWave Network Card User Manual


 
4/08 • 105502AE
FlexWave
Universal Radio Head
FlexWave
Universal Radio Head
Flexible Outdoor Coverage and Capacity
7
www.adc.com +1-952-938-8080 1-800-366-3891
Specifications
RF SPECIFICATION
Supported Frequency Blocks: 1-3 per Remote Unit; 1-8 per Host Unit
Bandwidth: 1.5 to 35 MHz non-contiguous
Frequency Band Supported: 800 Cellular, E-SMR 800/900,
1900 PCS 1700/2100 AWS
700, 1800 and 2500MHz (Future Releases)
Digital Simulcast: Up to 8:1 Single Host (can daisy chain Host for higher simulcast)
Diversity Receive: Yes (Optional)
PROPAGATION DELAY
System Delay: <12 microseconds
Delay Management: Digital (Manual or Automatic)
NOISE FIGURE
Noise Figure: <5 dB
Input IP3: >-8 dBm
OPTICAL SPECIFICATIONS
Optical Budget: 10 dB (Standard); 26 dB (Optional)
Digital Transport Rate: 3.072 Gbps
OUTPUT POWER
Output Power per Band: 38 dBm (6.5 Watts) Cell/SMR
43 dBm (20 Watts) PCS
43 dBm (20 Watts) AWS
REMOTE UNIT ENVIRONMENTAL SPECIFICATIONS
Outside Ambient
Temp Rating: -40°C to +50°C
Storage Temperature: -40°C to +70°C
Humidity: 10% to 90% non-condensing
Lightning Protection: 20kA IEC 1000-45 8/30 µs Waveform
REMOTE UNIT
Enclosure: IP-65
Mounting: Wall, Pole, Inside Pole, Strand, and Vault
Dimensions (H x W x D): 29.38" x 16.45" x 15.6"
Volume: 3.66 Cubic Feet
Weight: 200 Pounds (No one component >80 lbs.)
Cooling: Passive Convection
Optical Connectors: Sealed Proax
HOST UNIT
Mounting: 19- and 23-inch rack
Dimensions (H x W x D): 5.25" x 19" x 19" (3 RUs)
Weight: <25 Pounds
REMOTE UNIT POWER REQUIREMENTS
Power Supply: 100-240 VAC, 50-60 Hz
Battery Backup: Yes (External)
Power Consumption: ~1000 Watts (Fully loaded 20 W doors)
HOST UNIT POWER REQUIREMENTS
Power Source: 24 to 48 VDC
Power Consumption: ~250 Watts (Fully loaded with 8 DARTs)
Element Management
Embedded EMS: Yes
SNMP Based Management: Yes
Note: Unless noted otherwise specifications are typical and subject to change