ADC GigE Series Network Card User Manual


 
6 / 0 7 1 0 4 5 3 8 A E
UniPatch GigE Series
UniPatch
®
GigE Series
3
w w w . a d c . c o m + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 1 - 8 0 0 - 3 6 6 - 3 8 9 1
Specifications
ELECTRICAL
Characteristic Impedance: 100 Ohms typical
Voltage Rating: 500 Volts AC @ 60 Hz with a trip current of 1 milliamp for 1 minute
NEXT: Category 5e channel compliant
FEXT: Category 5e channel compliant
Contact Resistance: .02 Ohm maximum change post environmental
Insulation Resistance: 5000 Megohms minimum initial
MECHANICAL
Mechanical Durability: 30,000 cycles min (front port: dense pack); 50 cycles min (LSA slot)
Insertion Force: 7 lbs maximum
Withdrawal Force: 2 lbs minimum
Patch Cord Cable Bend and Twist: 500 cycles minimum
Dimensions: 2 rack unit
ENVIRONMENTAL
Thermal Shock: -40°C to 65°C operating; -55°C to 85°C non-operating
Moisture Resistance: 0% to 95%; MIL-STD-202 Method 106
Corrosion (Salt Spray): MIL-STD-202 Method 101, Test Condition B
Flammability: UL 94-VO rated
Vibration: MIL-STD-202 Method 201
Solvent Resistance: MIL-STD-202 Method 215
FINISH
Sheetmetal Panel: .075 CRS w/ protective black finish
Plastic Housings: ABS/PC, deep blue color
Contact Springs: 50 microinch gold plating MIL-G-45204 Type 1
PC Board: FR-4 with gold plated contacts
Card Edge Connector: LSA-PLUS: Krone 17-position termination block