Addonics Technologies REDESPU3 Computer Drive User Manual


  Open as PDF
of 2
 
T E C H N O L O G I E S
User Guide
Ruby eSATAp ExDrive
(REDESP, REDESPU3)
Installing your HD to the
Ruby eSATAp ExDrive
Step 1
Separate the top from the bottom cover of
the drive enclosure by loosening the screw.
Step 3
Wrap the shock absorbers around
the hard drive and PCB.
Switch
SATA Connector
PCB
Shock Absorbers
HD
Step 2
Align the SATA connector in the
2.5” hard drive with the SATA
connector on the PCB.
Step 4
Turn over the PCB and secure the hard
drive to the PCB with the mounting
screws that come with the kit.
Bottom of PCB
Technical Support
If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
v3.1.11
www.addonics.com