ADTRAN 4200659L8 Switch User Manual


 
Chapter 2. Installation and Operation
2-2 MX2800 User Manual 61200659L1-1
Six-foot AC power cord (AC Versions only)
Mounting ears and screws for 19-inch or 23-inch rack
installation
User Manual or CD containing the User Manual
Power Up
The AC version of the MX2800 STS-1 is provided with a six-foot
power cord, terminated by a three-prong plug which connects to a
grounded 120 VAC power receptacle.
The DC version of the MX2800 STS-1 is provided with two
4-position modular terminal lug connectors. These connectors
make it easier to perform initial wiring and to connect and
disconnect DC power when replacing rackmount units.
For more detailed information on power connections, refer to
Chapter 8, Power Loss Recovery.
Once the modular connector is wired, push it firmly into one of the
rear panel
POWER
connectors. Figure 2-1 and Table 2-1 on page
The ADTRAN MX2800 STS-1 MIB is available at
www.adtran.com
.
Power to the AC version of the MX2800 STS-1 must be provided from
a grounded 120 VAC, 60 Hz receptacle.