ADTRAN 1200214L1 Network Card User Manual


 
61200214L1-1 IQ Probe User Manual 25
Chapter 4. Applications
Control Port Mode
Set the Control Port Mode for TERMINAL (which is the default
setting). This selection is found in the SYSTEM portion of the
CONFIGURATION menu (SYSTEM -> CONTROL PORT
OPTIONS -> CONTROL PORT MODE).
Out-of-Band Management
This management option (shown in Figure 4-2) is commonly
used in situations where the customer is trying to reduce the
amount of management traffic flowing through the frame relay
device. The IQ Probe can be managed though an established
TELNET session or an SNMP-based network manager like HP
OpenView
®
, IBM Netview
®
, or SunNet Manager
®
.
The ADTRAN IQ Probe MIB is available in the support section of the
ADTRAN Web page at www.adtran.com.
SNMP and TELNET management is provided by one of the
following interfaces:
A device (e.g., a router) running SLIP protocol. Connection is
made through the IQ Probe's control port.
A device (e.g., a router) running async PPP protocol. Connec-
tion is made through the IQ Probe's control port.
A LAN. Connection is made through the 10baseT ethernet
interface.