Filter
Top Products
30 IQ Probe User Manual 61200214L1-1
Chapter 4. Applications
Write Community
Set the Write Community name to match the NMS settings.
Trap Manager DLCI
Identify the virtual circuit used for all traps generated by the IQ
Probe. This selection is found under TRAP MGR OPTIONS in
the SYSTEM portion of the CONFIGURATION menu.
Trap Manager IP Address
Enter the IP address of the SNMP manager to which the IQ
Probe sends traps. This selection is found under TRAP MGR
OPTIONS in the SYSTEM portion of the CONFIGURATION
menu.
Trap Manager Port
Select DTE PORT. The port will then be used to transmit traps to
the SNMP manager. This selection is found under TRAP MGR
OPTIONS in the SYSTEM portion of the CONFIGURATION
menu.
You may assign up to five possible trap destinations in the TRAP MGR
OPTIONS table.
Shared PVC Management
Shared PVC management refers to a PVC that is used for normal
data traffic between locations. The IQ Probe monitors this PVC
for packets that contain its IP address. When the IQ Probe
detects a packet containing a destination IP address that matches
the IQ Probe IP address, the unit intercepts the packet and
processes its TCP/IP information. To support this type of
management, all traffic on the selected PVC must be RFC 1490
encapsulated, noncompressed IP traffic.
Shared PVC management is used to manage remote ADTRAN
IQ devices without being dependent on services from the remote
router. This usually requires a static route at the host location.
By setting a local PVC management and shared PVC management on
the remote IQ Probe, its IP address can be found through Inverse ARP.