ADTRAN 1200214L1 Network Card User Manual


 
61200214L1-1 IQ Probe User Manual 51
Chapter 7. Configuring the DCE Port
Frame Relay Options (FR OPTS)
The terminal screen in Figure 7-2 appears when Frame Relay
Options is selected from the DCE Port Configuration Menu.
Figure 7-2
Terminal DCE Port Frame Relay Options Menu
Signaling Type (SIGNAL)
Set the signaling type option to match the DCE signaling type.
Choices are none, LMI (gang of four), ANSI T1.617-D (Annex D),
ITU-T Q.933-A (Annex A), or auto. AUTO mode forces the IQ
Probe to use the same signaling type as the attached frame relay
DTE. If AUTO is selected and there is no DTE device attached,
the IQ Probe uses ANSI T1.617-D signaling type.
T391
Set the time (in seconds) between polls to the frame relay net-
work.