Open as PDF
Section 5 User Interface Guide TRACER 4106/4206 System Manual
42 © 2004 ADTRAN, Inc. 612804206L2-1A
1. NAVIGATING THE TERMINAL MENU
The TRACER 4106/4206 menu system can be accessed with a VT100 compatible terminal that is
connected to the RS-232 port located on the back of the unit and set to 9600 bits per second, 8 data bits, 1
stop bit, and no parity. Flow control on the serial interface should be configured to
NONE for proper
operation. Once a terminal is connected, press <Ctrl + L> to refresh the current screen. If password access
has been enabled, the
ENTER PASSWORD message displays at the bottom of the TRACER 4106/4206
System Status menu.
Terminal Menu Window
The TRACER 4106/4206 uses a series of menu pages and a single main menu page to access its many
features. The main menu page (see Figure 1) provides a link to all available configuration/status pages.
Figure 1. Main Menu Screen
All TRACER 4106/4206 systems are shipped factory default with password protection
After connecting a VT100 terminal to the TRACER 4106/4206, press <Ctrl + L> to redraw
the current screen.