Filter
Top Products
NetVanta ADSL Network Interface Module (ADSL Over POTS) P/N 1200869E1/L1
For more detailed documentation, visit us online at www.adtran.com.
Quick Start Guide
®
Quick Start Guide, 61200869E1-13B, July 2006 Technical Support 1-888-4ADTRAN (1-888-423-8726) Copyright © 2006 ADTRAN, All Rights Reserved
WAN-ADSL DBU
INSTALLATION INSTRUCTIONS
1. Remove power from the base unit.
2. Slide the option module into the option slot until the module is
firmly seated against the chassis.
3. Secure the pins at both edges of the module.
4. Connect the cables to the associated device(s).
5. Complete installation of the base unit.
6. Restore power to the base unit.
For NetVanta modules with outside plant
connections, ensure that all cables are
removed from the module before installing
or removing it from the NetVanta chassis.
WAN-ADSL (RJ-11C) PINOUTS
Pin Name Description
1, 2 — Unused
3 R Network - Ring
4TNetwork - Tip
5, 6 — Unused
An optional Dial Backup Interface Module (DIM)
is required for dial backup applications.
For a description of the DBU pinouts, refer to the
Quick Start Guide included with your DIM
shipment.
Important: For additional details on product
features, specifications, installation, and safety,
refer to the appropriate Hardware Installation
Guide on the ADTRAN OS System Documentation
CD shipped with the base unit and available online
at www.adtran.com.
SPECIFICATIONS
ADSL Interface
ADSL over POTS, Annex A
Supported Standards:
ITU-T G.992.1 Annex A (G.dmt)
ITU-T G.992.2 Annex A (G.lite)
ITU-T G.992.3 Annex A ADSL2 (G.dmt.bis)
ITU-T G.992.5 Annex A ADSL2+
ITU-T G.992.3 Annex L READSL2
ANSI T1.413 Issue 2
Connector: RJ-11C (6-pin jack, inner pair)
Dying Gasp (NetVanta 3200 only)
ATM
Multiple Protocol over AAL5 (RFC2684)
PPP over ATM (RFC2364)
PPP over Ethernet (RFC2516)
ATM Forum UNI 3.1/4.0 PVC
ATM Class of Service (UBR)
ATM F5 OAM
Up to 16 Virtual Circuits
Compliance
FCC Part 15 Class A, EN 55022 Class A, EN 55024,
EN 61000-3-2, EN 61000-3-3
ACTA/FCC Part 68, IC CS-03, AS/ACIF S043,
AS/ACIF S002
EN 60950, IEC 60950, UL/CUL 60950, AS/NZS 60950
RoHS compliant, Telecommunications Exemption
(1200869E1 only)
Physical
Dimensions: 2.75-inch W x 4.25-inch D
Operating Temperature: 0°C to 50°C
Storage Temperature: -20°C to 70°C
Relative Humidity: Up to 95 percent, noncondensing
NetVanta modules should be installed only in
NetVanta Series products.