ADTRAN Small Form-Factor Pluggable Gigabit Ethernet Switch User Manual


  Open as PDF
of 2
 
DESCRIPTION
The Small Form-Factor Pluggable Gigabit Ethernet,
Single-Mode (SFPGS) plugs into ADTRAN GigE host
modules designed to accept SFPs. The SFPGS provides
an optical interface to the GigE physical interface.
Installed into an appropriate host module, the SFPGS
provides a Gigabit Ethernet tributary interface to the
supporting system.
NOTE: To ensure compatibility, refer to the documentation
provided with the host module.
The following features are supported on the SFPGS:
♦ 1000Base-LX 1310 nm, single-mode, 2 fiber
operation
♦ Optical distance: 10 km maximum
CAUTION: Due to compliance certification requirements,
only SFPs supplied by ADTRAN are to be used
with the host module. ADTRAN cannot certify
system integrity with other SFPs.
Operational Specifications
♦ Optical Specifications:
– Optical transmit level: –3 dBm to –11 dBm
– Optical receive level: –3 dBm to –19 dBm
– Link power budget: 8 dB
– Optical connectors: LC
♦ Extended Environmental Support:
– Operational temperature range: –40°C to +85°C
– Storage temperature range: –40°C to +100°C
– Relative humidity to 95%, noncondensing
Small Form-Factor Pluggable
Gigabit Ethernet, Single-Mode
INSTALLATION
To install the SFPGS into an appropriate module,
complete the following steps:
1. Inspect the SFPGS. If damaged, file a claim with the
carrier and then contact ADTRAN Customer Service.
2. Remove the safety cap from the optical connectors of
the SFPGS.
3. Insert the SFPGS into the receptacle on the circuit
board of the host module, with the manufacturer’s
label facing outward. Slide the SFPGS all the way
into the receptacle.
4. Use thumb and forefinger to squeeze the receptacle
and SFPGS together, to ensure a proper connection.
NOTE: The latch on the SFP is for removal only.
5. Continue the installation and turn-up of the host
module using the instructions in the Job Aid
provided with that module, or using the Installation
and Maintenance Practice (I&M), available online at
www.adtran.com
.
PROVISIONING
The SFPGS is not directly provisionable. To provision the
SFPGS, access the menu system of the host module.
Refer to the “Provisioning” section of the Job Aid or I&M
provided with the host module for provisioning details.
CLEI: SOOTAD9J_ _
Product P/N: 1184561P1
Issue Date: 0801
Document P/N: 61184561P1-22F