Filter
Top Products
Chapter 1 Hardware Configuration 3
1.2 Specifications
1.2.1 Standard SBC functions
• CPU: Intel® Pentium® 4 processor-M µ-FCPGA socket
• BIOS: Award 4 Mb flash memory
• Chipset: Intel ® 82845GV Graphics and Memory Controller Hub
(GMCH)
• Intel 82801DB I/O Controller Hub (ICH4)
• Front Side Bus: 400 MHz (Intel Pentium 4 processor-M)
• 2nd level cache: Built-in 512 KB on Intel Pentium 4 processor-M die
• RAM: 200-pin SO-DIMM. Support up to 512 MB non-ECC DDR200/
266.
• Enhanced IDE interface: In DAU Board, One IDE channel has two
connector (One IDE connector with space reserved for embedded
2.5” HDD and one external 44-pin (2mm) connector for external IDE
Device). Supports PIO mode 4(16.67 MB/s data transfer rate) and
Ultra ATA 100/66/33 (100/66/33 MB/s data transfer rate). BIOS
enabled/disabled.
• CompactFlash socket: one IDE CompactFlash socket onboard.
• Enhanced Parallel Port: Configurable to LPT1, LPT2, LPT3, or
disabled. Standard DB-25 female connector provided. Supports EPP/
SPP/ECP
• Serial ports: Two RS-232/422/485(jumper selectable) ports with
16C550 UARTs (or compatible) with 16-byte FIFO buffer. Supports
speeds up to 115.2 Kbps. Ports can be individually configured to
COM1, COM2 or disabled
• Keyboard and PS/2 mouse connector: One 6-pin mini-DIN connector
is located on the mounting bracket for easy connection to a key-
board or PS/2 mouse. An onboard keyboard pin header connector is
also available