Filter
Top Products
Introducing the Agilent 85225F Performance Modeling System 1
Installation and User’s Guide 59
The System Controller
A customer- furnished UNIX workstation or personal computer running
Agilent IC- CAP software controls the hardware via GPIB while making
device measurements, then stores, simulates, and optimizes device
parameters, using predefined or user- defined device models. Table 13 on
page 59 lists the personal computer requirements. Table 14 on page 59
lists the UNIX workstation requirements.
Table 13 Personal Computer Requirements
Parameter Requirement
Operating system Microsoft Windows NT® 4.0-SP6a or Windows 2000 Professional-SP3.
*
* Windows 95, 98, and ME are not supported.
CPU Intel Pentium® class 200 MHz CPU or higher
Display Super VGA 800×600, 15 inch monitor (1024×728 recommended)
Hard disk space 370 MB. It is recommended that you install IC-CAP software on your local drive.
Recommended file systems are FAT32 and NTFS. Novell file servers are not
supported. VFAT/FAT systems are not recommended for full installations.
RAM 128 megabytes (additional RAM will improve software performance)
Virtual memory 300 megabytes
†
(Increased virtual memory may be required)
† For NT 4.0 only: to avoid potential memory problems, ensure your virtual memory space is always greater than your RAM space.
Table 14 UNIX Workstation Requirements
Parameter Requirement
HP UNIX Workstation SunOS Workstation
Operating system HP-UX 11.i with the following patches:
PHSS_24627 HP aC++, AA Runtime
Libraries (aCC A.03.33), PHSS_25718 LIBCL
SunOS 5.7, 5.8, and 5.9
(Solaris 7.0, 8.0, 9.0)
Window manager HP VUE or CDE/X-Windows V.X11R5 Motif V.1.1/1.2 Open Windows 3.0, or CDE
RAM 128 megabytes (additional RAM will improve software performance)
Swap space 200 megabytes (additional swap space will improve software performance)
Hard disk 300 megabytes for minimum installation
500 megabytes for complete installation including online documentation and application
examples
Display High resolution color only